About Polystyrene Mouldings
CROWN MOLDINGS
GETTING STARTED
HOW TO INSTALL
FINISHING
STYLES
MOLDING IDEAS
CUSTOM CROWNS
ABOUT MOULDINGS

 

 

 

 

 

Practical Application

Expanded Polystyrene (EPS) mouldings are specifically designed and intended for use only as a decorative ceiling crown molding. Damage can occur if mouldings are subject to direct physical contact.

Product Reliability

All EPS used in moulding fabrication is UL approved and has fire retardant additives incorporated at the time of manufacture. Many home furnishings and decorator materials such as wood, paper, cloth, vinyl, etc., will ignite at much lower temperatures than EPS. Without
a source of energy EPS will self extinguish. It is the purchaser’s responsibility to ensure that products conform to local building codes.

Chemical Resolution

EPS is resistant to virtually all aqueous media, including dilute acids and alkalis, water soluble alcohols and silicones. There is limited resistance to paraffin oil, vegetable oils, diesel fuel and Vaseline.
EPS must not be exposed to organic solvents such as hydrocarbons, chlorinated hydrocarbons, ketones and esters. Note: If EPS is to be placed in contact with materials or vapors of unknown composition, tests should be made to determine compatibility.

Toxicity

Laboratory combustible product test indicate EPS is no more toxic than wood and minimal ingestion is not considered harmful.

Bacterial Resistance

EPS without soilage will not support fungus and bacteria growth.
It is also inert, odorless, non-irritating and non-corrosive.

Ozone Friendly

EPS contains no CFCs or HCFCs known to deplete the ozone layer.

Email: Sales@CeilingMate.ca

www.CeilingMate.ca
Or
Contact us at:
905-723-5532
Fax: 905-723-3781

CeilingMate is a Canadian company.